0 Pages • 1,721 Words • PDF • 496.8 KB
Uploaded at 2021-09-24 14:55
This document was submitted by our user and they confirm that they have the consent to share it. Assuming that you are writer or own the copyright of this document, report to us by using this DMCA report button.
Li#le Muggles amigurumi pa#ern
Rosie a !"ngtime bunny
Meet Rosie, a sweet and shy bunny who loves tending her small garden and growing her own flowers and vegetables. This adorable little bunny is made in soft colors, reminiscent of springtime blooms. She stands at approximately 11 inches (28cm) high, not including her ears. She wears a ruffled top and little green
Little Muggles - amigurumi design
pants - cute for greeting passers-by while working in her vegetable patch! MATERIALS Size USG 4.00mm crochet hook Worsted weight yarn (Lion Brand Vanna s Choice)
ABBREVIATIONS
-Linen (light gray) -White
st
stitch
-Fern (green)
sc
single crochet
-Taupe (dark brown)
dc
double crochet
Lion Brand WoolEase Yarn
inc
2sc into stitch
-Blush Heather (pink)
dec/sc2tog single crochet 2 together
-Dark Rose Heather (shoe color)
BLO
back loop only
Fiber fill 12mm safety eyes black embroidery thread yarn needle 3 buttons
FEBRUARY 2013
Little Muggles amigurumi designs - page 1
HEAD using gray yarn Rnd 1
6 sc into magic ring [6]
Rnd 2
inc into each st [12]
Rnd 3
(sc, inc) repeat around [18]
Rnd 4
(2sc, inc) repeat around [24]
Rnd 5
(3sc, inc) repeat around [30]
Rnd 6
sc around [30]
Rnd 7
(4sc, inc) repeat around [36]
Rnd 8
(5sc, inc) repeat around [42]
Rnd 9
(6sc, inc) repeat around [48]
Rnd 10-13
sc around [48]
Rnd 14
(7sc, inc) repeat around [54]
Stuff the head generously with fiber fill. Place
Rnd 15
sc around [54]
the safety eyes. I put mine between rows 15
Rnd 16
(8sc, inc) repeat around [60]
and 16, with 11 stitches between the eyes. Do
Rnd 17
sc around [60]
not place the backings yet.
Rnd 18
(9sc, inc) repeat around [66]
Rnd 19
(9sc, dec) repeat around [60]
EARS (make two)
Rnd 20
(8sc, dec) repeat around [54]
use gray yarn
Rnd 21
sc around [54]
Rnd 22
(7sc, dec) repeat around [48]
Rnd 1:
6st into magic ring
Rnd 23
(6sc, dec) repeat around [42]
Rnd 2:
inc into each st [12]
Rnd 24
sc around [42]
Rnd 3:
(sc, inc) repeat around [18]
Rnd 25
(5sc, dec) repeat around [36]
Rnd 4:
sc around [18]
Rnd 26
(4sc, dec) repeat around [30]
Rnd 5:
(2sc, inc) repeat around [24]
Rnd 27
(3sc, dec) repeat around [24]
Rnd 6:
sc around [24]
Rnd 28
(2sc, dec) repeat around [18]
Rnd 7:
(3sc, inc) repeat around [30]
Rnd 8:
sc around [30]
Rnd 9:
(3sc, dec) repeat around [24]
Rnd 10:
sc around [24]
Rnd 11:
(2sc, dec) repeat around [18]
Fasten off and leave a tail
Little Muggles - amigurumi design
Rnd 12-15: sc around [18]
B
Fasten off and leave a tail
Once the ears are made, sew the openings
A
shut.(A) They do not need to be stuffed with Little Muggles - amigurumi design
FEBRUARY 2013
any fiber fill. Pinch the ends together and sew it shut again.(B) Attach to head.
Little Muggles amigurumi designs - page 2
SNOUT use white yarn Row 1: Chain 7 Row 2: Starting in second chain from hook, sc to the end [6] Row 3: Turn your work, 5sc, inc in last st [7] Put a stitch marker into the last stitch you made. This is now Stitch #1 as you continue in the round. This first round should have 14 stitches. Rnd 1: inc in stitches 2,7,9,14 [18] Rnd 2: inc in stitches 3,9,12,18 [24] Fasten off and leave a tail
To finish the snout, take your yarn needle and brown yarn. Pick 4 spots and go over them with yarn until you are happy with the nose. Then use the embroidery thread
A
to make the smile. Starting from the back, poke through an opening at point A. From front to back, enter at point B. Come out again at point C and back in again at point D. Tie the ends tightly in the back. You may also use tacky glue to ensure a smile that won t budge! Sew
C B
D Little Muggles - amigurumi design
snout onto head.
Little Muggles - amigurumi design
FEBRUARY 2013
Little Muggles amigurumi designs - page 3
BODY use green yarn Rnd 1:
6sc into magic ring
Rnd 2:
inc in each st [12]
Rnd 3:
(sc, inc) repeat around [18]
Rnd 4:
(2sc, inc) repeat around [24]
Rnd 5:
(3sc, inc) repeat around [30]
Rnd 6:
sc around [30]
Rnd 7:
(4sc, inc) repeat around [36]
Rnd 8:
(5sc, inc) repeat around [42]
Rnd 9:
(6sc, inc) repeat around [48]
Rnd 10:
(7sc, inc) repeat around [54]
Rnd 11:
sc around [54]
Little Muggles - amigurumi design
Change to pink yarn Rnd 12:
(8sc, inc) repeat around [60]
ARM (make two)
Rnd 13:
(8sc, dec) repeat around [54]
use gray yarn
Rnd 14:
sc around [54]
Rnd 15:
(7sc, dec) repeat around [48]
Rnd 1:
6sc into magic ring
Rnd 16:
sc around [48]
Rnd 2:
inc in each st [12]
Rnd 17:
(6sc, dec) repeat around [42]
Rnd 3:
(sc, inc) repeat around [18]
Rnd 18-21: sc around [42]
Rnd 4-5:
sc around [18]
Rnd 22:
(5sc, dec) repeat around [36]
Rnd 6:
(sc, dec) repeat around [12]
Rnd 23:
sc around [36]
Rnd 7-10:
sc around [12]
Rnd 24:
(4sc, dec) repeat around [30]
Rnd 11:
(2sc, dec) repeat around [9]
Rnd 25:
(3sc, dec) repeat around [24]
Rnd 12:
sc around [9]
Change to gray yarn
Rnd 13:
2sc, dec, 5sc [8]
Rnd 26:
sc around [24]
Change to pink yarn
Rnd 27:
(2sc, dec) repeat around [18]
Rnd 14-16: sc around [8]
Fasten off and leave a tail
FEBRUARY 2013
Fasten off and leave a tail
Little Muggles amigurumi designs - page 4
Little Muggles - amigurumi design
RUFFLE use pink yarn Chain 58 Row 1: (4sc, 3sc into next st) 11 times, 3sc [80] Row 2: 3sc into first st, 2sc, **3sc into next st, 3sc, 3sc into next st, 2sc** 11 times [126] Fasten off and leave a long tail
Little Muggles - amigurumi design
The ruffle should be just long enough to wrap around the circumference of the body where the pink and green meet. You may have to alter the length of your ruffle, depending on the tightness of your stitches and the firmness of the body. Sew the ruffle onto the body and sew the seam where the two ruffle ends meet. Little Muggles amigurumi designs - page 5
Little Muggles - amigurumi design
SHOE use white yarn Row 1:
Chain 8
Row 2:
starting in the 2nd chain from hook, sc to end [7]
Row 3:
Turn your work, 6sc, inc in last st [8]
Put a stitch marker into the last stitch you made. This is now Stitch #1 as you continue in the round. There should be 16 stitches in the first round. Rnd 1:
inc into stitches 2,8,10,16 [20]
Rnd 2:
inc into stitches 3,10,13,20 [24]
Rnd 3:
inc into stitches 4,12,17,24 [28]
Rnd 4:
inc into stitches 5,14,19,28 [32]
Change to purple yarn Rnd 5:
back post single crochet around [32]
Rnd 6:
10dc, (dc2tog, dc) 5 times, 7dc [27]
Rnd 7:
10sc, (sc2tog, sc) 3 times, 6sc [24] Little Muggles - amigurumi design
Change to gray yarn Rnd 8: (BLO)
Back post single crochet creates a nice edge to the sole of the shoe.
9sc, (sc2tog, sc) 3 times, 6sc [21] Rnd 9:
8sc, (sc2tog, sc) 3 times, 4sc, [18]
Rnd 10-11: sc around [18] Rnd 12:
(3sc, inc) repeat 4 times, 2sc [22]
Rnd 13:
sc around [22]
Rnd 14:
(10sc, inc) twice [24]
Rnd 15:
sc around [24]
FEBRUARY 2013
Little Muggles amigurumi designs - page 6
Little Muggles - amigurumi design
PANT LEG use green yarn Leaving a tail long enough to weave in, Chain 25 Join with a slip stitch to form a ring Rnd 1-4:
sc around [25]
Rnd 5:
9sc, sc2tog, 8sc, sc2tog, 4sc [23]
Rnd 6:
sc around [23]
Rnd 7:
7sc, sc2tog, 7sc, sc2tog, 5sc [21]
Rnd 8:
sc around [21]
Fasten off. This is the top of the pant leg, the opening which will be attached to the bunny s body.
FEBRUARY 2013
Little Muggles amigurumi designs - page 7
ASSEMBLY Take the pant leg and slide it over the leg. It should fit fairly snug inside. You can leave as much of the bare leg as you want, as long as you have enough height inside to attach the pant leg when sewing. You are ready to sew the pants onto the leg! Start Little Muggles - amigurumi design
by threading your needle with your green yarn. You basically sew around the circumference of the leg, but make sure to push your needle through both the pants and the leg. Refer to my pictures below as to where my stitches were made. When you pull the yarn through, don t pull it too tight. Otherwise, the pant leg will pucker and you will have a very unsightly hem.
Little Muggles - amigurumi design
Little Muggles - amigurumi design Little Muggles - amigurumi design Little Muggles - amigurumi design
Little Muggles - amigurumi design
FEBRUARY 2013
Little Muggles amigurumi designs - page 8
You should now have the head, arms, and legs/feet completely assembled. Now you can start attaching the pieces together! First, make sure your safety eyes have the backings attached. Sew the head onto the body. Next, sew the arms on. Please note the symmetry. You should pin each arm in place before sewing. Pin each leg on as well. Make sure things are symmetrical and balanced. Sew each leg on one at a time. Finally, sew three buttons on to the front of the bunny s top. Congratulations!! You are finished with your bunny!! I hope you you had a pleasant time creating your doll. Please do not hesitate to contact me if you have any questions or comments regarding my pattern! I welcome all feedback! Feel free to email me pictures of your finished doll! You can also post your pictures onto my facebook page for all to see! Have a wonderful day and please visit my shop again soon for more original amigurumi designs! Cheers! Amy @LittleMuggles www.littlemuggles.com www.facebook.com/littlemugglesworld
Little Muggles - amigurumi design
FEBRUARY 2013
Little Muggles amigurumi designs - page 9